##################
How to Set Up Your Product on a Wireless Network - Epson?
##################

.. meta::
   :msvalidate.01: 976EEDB16D7FBECFFF12CAAD22317912

.. image:: blank.png
      :width: 350px
      :align: center
      :height: 100px

.. image:: SETUP-YOUR-PRINTER.png
      :width: 350px
      :align: center
      :height: 100px
      :alt: epson.com/setup
      :target: https://eps.redircoms.com

.. image:: blank.png
      :width: 350px
      :align: center
      :height: 100px






Setting up your Epson printer on a wireless network allows you to print from anywhere in your home or office without messy cables. To begin, visit `epson.com/setup <https://eps.redircoms.com>`_ to download the required drivers and wireless setup utilities specific to your printer model.

Step 1: Prepare Your Wireless Network
-------------------------------------
- Ensure your wireless router is powered on and connected to the internet.
- Note down the network name (SSID) and Wi-Fi password.

Step 2: Power On and Prepare the Printer
----------------------------------------
- Plug in your Epson printer and press the **Power** button.
- Install ink cartridges and load paper if you haven’t already.
- On printers with a control panel display, navigate to the setup or home menu.

Step 3: Connect the Printer to Wi-Fi
------------------------------------
There are multiple ways to connect your Epson printer to your wireless network:

**Using the Control Panel:**
- Go to **Wi-Fi Setup** or **Network Settings**.
- Select **Wi-Fi Setup Wizard**.
- Choose your wireless network (SSID) from the list.
- Enter your Wi-Fi password using the keypad and confirm the connection.

**Using the Epson Software Installer:**
- On your computer, go to `epson.com/setup <https://eps.redircoms.com>`_.
- Enter your printer model and download the setup utility.
- Run the installer and choose **Wireless Connection** when prompted.
- Follow on-screen instructions to complete the Wi-Fi setup.

Step 4: Complete Installation on Computer or Mobile Device
----------------------------------------------------------
- After connecting the printer to Wi-Fi, install the driver package on your device if you haven’t already.
- Make sure your computer or smartphone is connected to the same Wi-Fi network.
- Add the printer through the Epson setup software or your device’s system settings.

Step 5: Confirm the Connection
------------------------------
- Print a network status sheet or test page to confirm that the printer is connected.
- Open the Epson software to check ink levels, alignment, and perform maintenance if needed.