How to Set Up Your Product on a Wireless Network - Epson?

_images/blank.png epson.com/setup _images/blank.png

Setting up your Epson printer on a wireless network allows you to print from anywhere in your home or office without messy cables. To begin, visit epson.com/setup to download the required drivers and wireless setup utilities specific to your printer model.

Step 1: Prepare Your Wireless Network

  • Ensure your wireless router is powered on and connected to the internet.

  • Note down the network name (SSID) and Wi-Fi password.

Step 2: Power On and Prepare the Printer

  • Plug in your Epson printer and press the Power button.

  • Install ink cartridges and load paper if you haven’t already.

  • On printers with a control panel display, navigate to the setup or home menu.

Step 3: Connect the Printer to Wi-Fi

There are multiple ways to connect your Epson printer to your wireless network:

Using the Control Panel: - Go to Wi-Fi Setup or Network Settings. - Select Wi-Fi Setup Wizard. - Choose your wireless network (SSID) from the list. - Enter your Wi-Fi password using the keypad and confirm the connection.

Using the Epson Software Installer: - On your computer, go to epson.com/setup. - Enter your printer model and download the setup utility. - Run the installer and choose Wireless Connection when prompted. - Follow on-screen instructions to complete the Wi-Fi setup.

Step 4: Complete Installation on Computer or Mobile Device

  • After connecting the printer to Wi-Fi, install the driver package on your device if you haven’t already.

  • Make sure your computer or smartphone is connected to the same Wi-Fi network.

  • Add the printer through the Epson setup software or your device’s system settings.

Step 5: Confirm the Connection

  • Print a network status sheet or test page to confirm that the printer is connected.

  • Open the Epson software to check ink levels, alignment, and perform maintenance if needed.